Description

The “X2 Pro” is likely a general designation for various budget in-ear monitors (IEMs) or headphones, as there are multiple models with this name, but generally, they are wired 3.5mm in-ear headphones with a single 12mm or dual dynamic driver, designed for music listening and stage monitoring. Key specifications often found on these models include a 12mm driver, a 16Ω or 32Ω impedance, a sensitivity of around 98dB, a frequency range of 20-20,000 Hz, a 1.2m (or 120cm) cable, and a 3.5mm connector. 

General Specifications 

  • Driver Type: Single or Dual Dynamic Driver
  • Driver Diameter: 12mm or 13mm
  • Frequency Response: 20Hz – 20kHz or 20Hz – 23kHz
  • Impedance: 16Ω or 32Ω
  • Sensitivity: ~98dB/mW
  • Connection: Wired, typically with a 3.5mm connector
  • Cable: Detachable, often 1.2 meters (120cm) long
  • Connector Type: 2-pin (e.g., 0.75mm) for the cable to the earphone, with 3.5mm for the audio source
Key Features
  • Detachable Cable: Allows for easier replacement if the cable is damaged. 
  • In-line Controls: Some models include a microphone and control buttons for music and call management. 
  • Sound Quality: Advertised as HiFi and bass-heavy. 
  • Design: Can be found in various colors, with an over-ear design for a secure fit. 
What to Consider
  • Model Variation:

    Because there are multiple products named “X2 Pro,” specifications can vary between brands like Victoria Audio, Guangzhou CeWei Technology, and others. 

  • Intended Use:

    Some models are marketed specifically for musicians and singers for stage monitoring, while others are general-purpose. 

  • Microphone:
    Not all “X2 Pro” models come with a microphone; some are specifically listed as “no microphone” for monitoring purposes.

Additional information

SPECS

Driver Type: Single or Dual Dynamic Driver
Driver Diameter: 12mm or 13mm
Frequency Response: 20Hz – 20kHz or 20Hz – 23kHz
Impedance: 16Ω or 32Ω
Sensitivity: ~98dB/mW
Connection: Wired, typically with a 3.5mm connector
Cable: Detachable, often 1.2 meters (120cm) long
Connector Type: 2-pin (e.g., 0.75mm) for the cable to the earphone, with 3.5mm for the audio source

Reviews (0)

Be the first to review “X2 Pro In Ear Monitor”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

Product was successfully added to your cart!